{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Drill range | 1 mm - 10 mm | |
Coating | uncoated | |
Tool material | HSS E | |
Standard | DIN 338 | |
Type | N | |
Tolerance nominal ⌀ | h8 | |
Point angle | 130 degrees | |
Shank | Plain shank | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
Number of drills | 19 | |
Incremental steps of drills | 0.5 mm | |
with case | no | |
Colour ring | red | |
Type of product | Jobber drill |
Article number | 115300 1-10 | |
EAN / GTIN | 4045197024862 | |
Manufacturer number | 115300 1-10 |
This article |
Recommendations |
||||||||
---|---|---|---|---|---|---|---|---|---|
Jobber drill set HSS-E No. 114400 as refill set, uncoated, Type: 1-10 |
|||||||||
Number of drills | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 |
Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Coating | uncoated | TiN | uncoated | TiN | TiN | uncoated | uncoated | uncoated | uncoated |
Incremental steps of drills | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
Colour ring | red | without | yellow | without | without | red | without | without | without |
Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank; Plain shank | Plain shank |
Point angle | 130 degrees | 130 degrees | 130 degrees | 118 degrees | 118 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees |