{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS-E centre drill for tapping holes A with flat M10
Article no.: 111313 M10
Article code:
- Tool material: HSS E
- Standard: DIN 332/2
- Type: A
- Tolerance nominal ⌀: 0 / -0.05
- Countersink angle: 60
Product details
Technical Data
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 332/2 | |
| Type | A | |
| Tolerance nominal ⌀ | 0 / -0.05 | |
| Countersink angle | 60 degrees | |
| Cutting direction | right-hand | |
| Shank | Parallel shank to h7 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Nominal ⌀ DC | 8.5 mm | |
| ⌀ D1 1st step with chamfer ±0.05 | 10.5 mm | |
| ⌀ D2 2nd step | 16 mm | |
| Step height L1 1st step | 23 mm | |
| Step height L2 2nd step | 27.7 mm | |
| for workpiece ⌀ | 180 − 210 mm | |
| Shank ⌀ Ds | 16 mm | |
| s − 0.1 | 14.85 mm | |
| Overall length L | 90 mm | |
| Feed f in steel < 900 N/mm2 | 0.15 mm/rev. | |
| Colour ring | without | |
| Type of product | convex |
Identification numbers & Classifications
| Article number | 111313 M10 | |
| EAN / GTIN | 4062406101985 | |
| Manufacturer number | 111313 M10 |
Application Table
N
65
N
65
N
60
P
28
P
30
P
30
P
9
P
7
M
7
K
28
N
35
Description
Version:
Stepped centre drill for tapping holes to Form A.
For combined production of centring, entry chamfer and tapping hole all in a single operation.
With additional flats on the shank.
For combined production of centring, entry chamfer and tapping hole all in a single operation.
With additional flats on the shank.