{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill, uncoated, ⌀ e8 DC: 3mm
Article no.: 202241 3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 6 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.008 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.01 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202241 3 | |
| EAN / GTIN | 4045197767004 | |
| Manufacturer number | 202241 3 |
Application Table
N
170
N
140
N
105
N
160
N
110
N
130
N
110
N
90
N
160
N
120
N
150
Description
Version:
Eccentric relief ground, additionally finish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Application:
For roughing and finishing.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide slot drill, uncoated, ⌀ e8 DC: 3mm |
on request
In stock
100 pieces in stock
157,94 DKK
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
246 pieces in stock
276,91 DKK
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
565 pieces in stock
276,91 DKK
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
568 pieces in stock
NOK 640,22
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
166 pieces in stock
NOK 860,86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
324 pieces in stock
NOK 640,22
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
116 pieces in stock
NOK 604,58
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
147 pieces in stock
NOK 663,47
plus VAT at the current rate
Prices plus delivery costs
|
||
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Hel not, skæredybde 1×D; 0,5×D ved beskæring | Hel not, skæredybde 1×D; 0,5×D ved beskæring | Hel not, skæredybde 1×D; 0,5×D ved beskæring | Hel not, skæredybde 1×D; 0,5×D ved beskæring | fullspår sågdjup 1×D; 0,5×D vid valsfräsning | fullspår sågdjup 1×D; 0,25×D vid valsfräsning | fullspår sågdjup 1×D; 0,5×D vid valsfräsning | fullspår sågdjup 1×D; 0,5×D vid valsfräsning | fullspår sågdjup 1×D; 0,5×D vid valsfräsning |
| Helix angle | 45 degrees | 45 grader | 45 grader | 45 grader | 45 grad | 45 grad | 20 grad | 45 grad | 42 grad | 38 grad |
| Tolerance nominal ⌀ | e8 | e8 | h10 | h6 | h6 | h6 | e8 | h6 | e8 | e6 |
| No. of teeth Z | 3 | 2 | 2 | 3 | 3 | 3 | 2 | 3 | 3 | 2 |
| Direction of infeed | horizontal, oblique and vertical | Vandret, skrå og lodret | Vandret, skrå og lodret | Vandret, skrå og lodret | Vandret, skrå og lodret | horisontell, sned och vertikal | horisontell, sned och vertikal | horisontell, sned och vertikal | horisontell, sned och vertikal | horisontell, sned och vertikal |
| Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 3 mm | 6 mm | 6 mm | 6 mm |
| Type of product | End / face mill | Hjørnefræser | Hjørnefræser | Hjørnefræser | Hjørnefræser | Hörnfräs | Hörnfräs | Hörnfräs | Hörnfräs | Hörnfräs |