{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Electronic torque screwdriver 300 cNm
Article no.: 659005 300
Article code:
- Direction of tightening: For right and left-hand tightening
- Square drive: 1/4
- Torque measuring accuracy: ±4
- Interface: USB interface
- Bit socket: F 6.3
Product details
Technical Data
| maximum torque | 300 cNm | |
| Direction of tightening | For right and left-hand tightening | |
| Square drive | 1/4 in | |
| Torque measuring accuracy | ±4 % | |
| Interface | USB interface | |
| Bit socket | F 6.3 | |
| Test certificate | Manufacturer’s test certificate | |
| Series | TORSIOTRONIC | |
| Overall length L | 317 mm | |
| Torque range | 0.3 Nm - 3 Nm | |
| Torque range | 30 cNm - 300 cNm | |
| Resolution | 0.1 cNm | |
| Weight | 679 g | |
| Display | digital | |
| Release signalling | acoustic; haptic; visual | |
| Trigger principle | mechanical slip clutch | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | electronic | |
| Data can be recorded | yes | |
| Setting the trigger value | digital, adjustable | |
| Feedback | visning; triggering; acoustic signal | |
| Reversible reading | Nm; cNm; lbfin; lbfft; ozfin | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Power supply | Rechargeable battery-powered | |
| Number of rechargeable batteries contained | 1 | |
| Type of rechargeable battery | Lithium-ion | |
| Battery voltage | 3.6 V | |
| Battery capacity | 2.6 Ah | |
| Replaceable battery | yes | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659005 300 | |
| EAN / GTIN | 4018754299409 | |
| Manufacturer number | 96510730 |
Description
Version:
Integral bit ratchet with 80 teeth for a working angle of just 4.5°. This enables fine-step work with screw connections that are difficult to access.
Mechanics with ball mechanism triggers audibly and noticeably when the target torque is reached. After triggering, the sliding mechanism prevents the set tightening torque from being exceeded unintentionally and the screw from being overtightened.
Ergonomically shaped ball handle allows fatigue-free working. A 1/4 inch square drive is incorporated into the end of the handle. Resistant to oils, greases, fuels and brake fluids.
Units of measure: cNm, Nm, lbfft, lbfin, ozf·in
Mechanics with ball mechanism triggers audibly and noticeably when the target torque is reached. After triggering, the sliding mechanism prevents the set tightening torque from being exceeded unintentionally and the screw from being overtightened.
Ergonomically shaped ball handle allows fatigue-free working. A 1/4 inch square drive is incorporated into the end of the handle. Resistant to oils, greases, fuels and brake fluids.
- Three operating modes with visual, acoustic and haptic stop signal.
- Memory capacity: Up to 2500 measured values.
- An integral micro-USB port permits the measurement data to be read and documented at terminals.
- Bright OLED power display, low power consumption places little burden on the battery.
Units of measure: cNm, Nm, lbfft, lbfin, ozf·in
Application:
Torque control; controlled tightening of screws in a single operation or for small batch production.
Standard:
Tested to DIN EN ISO 6789.
Supplied with:
Supplied with a 3.6 V / 2.6 Ah Lithium-ion battery type 18650 (external charging), SENSOMASTER 4 software, micro-USB on a USB-A cable, bit-holder (hexagonal drive D 6.3; 1/4 inch). In a plastic case.
Note:
Suitable charger and charger adapter available on request. Additional batteries can be found under No. 081574 size 2600 or alternatively size 3500.