{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench without scale 300 N·m
Article no.: 657352 300
Article code:
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±3
Product details
Technical Data
| maximum torque | 300 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±3 % | |
| Overall length L | 587 mm | |
| Torque range | 60 Nm - 300 Nm | |
| Weight | 1,600 g | |
| Square drive | 1/2 in | |
| Release signalling | acoustic; haptisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | without setting scale (requires torque analyser) | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | preset | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 460 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 657352 300 | |
| EAN / GTIN | 4045197804211 | |
| Manufacturer number | 657352 300 |
Description
Version:
Single-handed torque wrenches without a setting scale. Wrench setting using torque analyser.
Integral ratchet with captive push-through square drive pin for right-hand and left-hand tightening.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a ″signal″ (audible and perceptible) and is then immediately ready for use again.
Application:
For controlled screw tightening etc. to specified torques in series production.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
±3% of the set value.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.