{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Disc brush, silicon carbide (SiC) 120
Article no.: 575010 120
Article code:
- Grinding medium code: SiC
Product details
Technical Data
| Grit | 120 | |
| Brush ⌀ D1 | 70 mm | |
| Disc dia. D2 | 76 mm | |
| Grinding media | Silicon carbide (SiC) | |
| Grinding medium code | SiC | |
| Grit designation | medium | |
| Bristle thickness | 1.1 mm | |
| Working area ⌀ | 70 mm | |
| Bore ⌀ d1 | 22 with groove mm | |
| Length of brush section H1 | 35 mm | |
| recommended speed | 1,900 min-1 - 2,300 min-1 | |
| maximum speed | 4,500 min-1 | |
| Feed | 2,500 mm/min - 5,000 mm/min | |
| Infeed | 0.8 (fine) – 1.5 (coarse) mm | |
| Type of product | Disc brush |
Identification numbers & Classifications
| Article number | 575010 120 | |
| EAN / GTIN | 4045197892614 | |
| Manufacturer number | 575010 120 |
Application Table
Description
Version:
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
Nylon bristles with very high silicon carbide grit content for general-purpose use.
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
Nylon bristles with very high silicon carbide grit content for general-purpose use.
Advantage:
- Workpiece rework directly after the machining process.
- Reproducible results due to constantly exposed grinding grit.
- Good process reliability thanks to high shape stability and shape accuracy.
- Quick and secure installation without further accessories.
- Very low radial run-out.
Application:
On CNC machining centres and when used by robots, preferably wet grinding with cooling lubricant. Machining of flat components: precise deburring, edge rounding, finish machining after milling, surface finishing e.g. of sealing and mating faces.
Note:
Special versions available on request.