{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Marker 20 mm
Article no.: 358725 20
Article code:
Product details
Technical Data
| L1 | 35.2 mm | |
| L | 87.7 mm | |
| ⌀ D1 | 0.5 mm | |
| Shank ⌀ d | 20 mm | |
| ⌀ D | 16.5 mm | |
| Type of product | Labelling tool |
Identification numbers & Classifications
| Article number | 358725 20 | |
| EAN / GTIN | 4067263550662 | |
| Manufacturer number | 358725 20 |
Description
Version:
Body of tool steel with Weldon shank.
Advantage:
Surface sealing without weakening or damaging the material. Inscription speed corresponds to the maximum feed rate. High wear resistance, with long working life for the special needles. Suitable for inscriptions on round surfaces. Can be used on the lathe. High process reliability. Needles easily withdrawn, therefore quick needle change. Irregularities up to 7 mm in the workpiece surface (depending on profile) can be compensated.
Cleaning of the workpiece surface by compressed air channels with different approach angles max. 10 bar. Adjustment of the font width by adjusting the contact force, no different needle radii required! High wear resistance of the marking tip due to rolling ball. No burr formation.
Cleaning of the workpiece surface by compressed air channels with different approach angles max. 10 bar. Adjustment of the font width by adjusting the contact force, no different needle radii required! High wear resistance of the marking tip due to rolling ball. No burr formation.
Application:
For marking on a wide variety of materials such as aluminium, titanium, steel, bronze, copper, brass, plastics etc. Smaller needle tips allow inscriptions on harder surfaces up to 57 HRC.
Supplied with:
Supplied with 1x marking tip No. 358729.