{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Tap extension with HB flat 4
Article no.: 338420 4
Article code:
Product details
Technical Data
| for thread nominal ⌀ d1 DIN 371 | M4.5 − M6 | |
| for thread nominal ⌀ d1 DIN 374/376 | M8 | |
| for thread shank ⌀ d2 | 6 mm | |
| Extension ⌀ D3 | 8 mm | |
| Extension K2 | 6.2 mm | |
| Extension L2 | 60 mm | |
| Extension L3 | 130 mm | |
| Type of product | Extension |
Identification numbers & Classifications
| Article number | 338420 4 | |
| EAN / GTIN | 4045197812247 | |
| Manufacturer number | 338420 4 |
Description
Version:
- Long and extra long version.
- The front end of the extension acts as a collet. The collet is clamped to the tap by hand-tightening the knurled clamping nut.
- The drive torque is transmitted via the square drive.
- The rear part of the extension is to DIN, so that the extension can be mounted in quick-change tapping collets or ER tapping collets with a square drive.
h6 shank with Weldon flat for use in Weldon/shrink-fit chucks or hydraulic chucks.
Application:
For tapping in confined places, such as recesses, offsets, sharp edges on jigs, extremely deep internal threads, or directly into casting walls.
Note:
Alternative hexagon collet for fixing the tap available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Tap extension with HB flat 4
on request
In stock
4 pieces in stock
204,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
171,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
204,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
197,23 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| for thread nominal ⌀ d1 DIN 371 | M4.5 − M6 | M4.5 − M6 | M4.5 − M6 | M4.5 − M6 |
| for thread nominal ⌀ d1 DIN 374/376 | M8 | M8 | M8 | M8 |
| Extension ⌀ D3 | 8 | 7 | 7 | 12 |
| Extension L2 | 60 | 60 | 60 | 45 |
| Extension L3 | 130 | 130 | 130 | 145 |
| for thread shank ⌀ d2 | 6 | 6 | 6 | 6 |
| Type of product | Extension | Extension | Extension | Extension |