{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pull stud 60° sealed 50
Article no.: 308785 50
Article code:
- Pull stud standard: MAS 403
Product details
Technical Data
| suitable for steep tapers | 50 | |
| Hole characteristics | with bore | |
| Pull stud standard | MAS 403 | |
| Collar ⌀ D | 38 mm | |
| Head ⌀ D1 | 23 mm | |
| Overall length L | 85 mm | |
| L1 | 45 mm | |
| Thread M | M24 | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308785 50 | |
| EAN / GTIN | 4045197543103 | |
| Manufacturer number | 308785 50 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.