{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 251954 HB7130-2
Indexable insert for turning WNMG 060408, for finish machining, Grade: HB7140-1
Article no.: 251954 HB7140-1
Article code:
Product details
Technical Data
| ISO code indexable insert | WNMG 060408 | |
| Corner radius | 0.8 mm | |
| Grade | HB7140-1 | |
| Tool material | Carbide | |
| Main application | M | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | VS | |
| Cutting depth ap | 0.3 mm - 2 mm | |
| Feed f | 0.1 mm/rev. - 0.4 mm/rev. | |
| Cutting speed vc main application | 70 m/min - 260 m/min | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 251954 HB7140-1 | |
| EAN / GTIN | 4045197820815 | |
| Manufacturer number | 251954 HB7140-1 |
Application Table
M
M
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Indexable insert for turning WNMG 060408, for finish machining, Grade: HB7140-1
on request
In stock
229 pieces in stock
from
1
Pieces
€13.46
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€11.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
271 pieces in stock
from
1
Pieces
€14.28
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€11.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
449 pieces in stock
from
1
Pieces
€13.73
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€11.44
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
181 pieces in stock
from
1
Pieces
€14.56
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€12.13
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 6 | 6 | 6 | 6 |
| Corner radius | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
| Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
| Cutting depth ap | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm |
| Chip breaker | VS | VS | VS | VS |
| Main application | M | M | M | M |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |