{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 250210 CA125P
Product details
Technical Data
| ISO code indexable insert | CNMG 120404 | |
| Corner radius | 0.4 mm | |
| Grade | CA025P | |
| Tool material | Carbide | |
| Coating | CVD | |
| Main application | P | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | PS | |
| Cutting depth ap | 1 mm - 3.5 mm | |
| Feed f | 0.15 mm/rev. - 0.35 mm/rev. | |
| Cutting speed vc main application | 70 m/min - 420 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250210 CA025P | |
| Manufacturer number | TMH00104 |
Application Table
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
CNMG 120404 CA025P |
on request
In stock
1,865 pieces in stock
from
1
Pieces
12,28 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,24 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
695 pieces in stock
7,42 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 4 | 4 | 4 |
| ISO code indexable insert | CNMG 120404 | CNMG 120404 | CNMG 120404 |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Semi-roughing | Skrubbearbejdning-sletbearbejdning |
| Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted |
| Main application | P | P | P |
| Cutting speed vc main application | 70 m/min - 420 m/min | 120 m/min - 350 m/min | 100 m/min - 280 m/min |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |