{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KUB Pentron® indexable drill Plain shank 15 mm
Article no.: 236614 15
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 15 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 30 mm | |
| for inch ⌀ | 19/32 in | |
| Overhang LA | 44 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| ISO code indexable insert | SOGX 040204 10-... | |
| Pack of insert screws | 239652 5IP1 (0.38 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236614 15 | |
| EAN / GTIN | 4047109278158 | |
| Manufacturer number | U42 01500 |
Description
Version:
Bore tolerance: ⌀D − 0.1 / + 0.2
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
KUB Pentron® indexable drill Plain shank 15 mm
on request
Available in 2-3 weeks
0 pieces in stock
€438.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
€381.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€311.65
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 1 | 1 | 1 |
| Through-coolant | yes | yes | yes |
| Shank ⌀ Ds | 20 | 20 | 20 |
| Shank length Ls | 50 | 50 | 50 |
| Pack of insert screws | 239652 5IP1 (0.38 Nm) | 239700 5IP (0.38 Nm) | 232980 1 (TX6;0.4Nm) |
| Reach L1 | 30 | 30 | 33 |
| Overhang LA | 44 | 44 | 49 |