{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill indexable drill Combination shank 38 mm
Article no.: 234000 38
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 38 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 76 mm | |
| for inch ⌀ | 1 1/2 in | |
| Overhang LA | 103 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 130511 | |
| Pack of insert screws | 239700 20IP (6.3 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 234000 38 | |
| EAN / GTIN | 4045197740038 | |
| Manufacturer number | 234000 38 |
Description
Izvedba:
Zaviti hladilni kanali zagotavljajo največjo trdnost, saj jedro svedra zaradi njih ni oslabljeno.
Toleranca izvrtine: −0,1/+0,3 mm
Toleranca izvrtine: −0,1/+0,3 mm
Opis:
Za največjo zmogljivost in natančnost mer. Tudi pri težavnem vrtanju do 5×D.
Primerno za:
Obračalne ploščice SOGX 130511.
Opomba:
Druge vmesne velikosti v 1/10-enotah so dobavljive po ponudbi.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Power Drill indexable drill Combination shank 38 mm
on request
In stock
1 pieces in stock
€557.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3 pieces in stock
397,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Globina vrtanja svedra z obračalnimi ploščicami do | 2×D | 2×D |
| ISO-oznaka obračalne ploščice | SOGX 130511 | SOMT13M510 / XOMT13M506 |
| Držalo | ISO 9766 | ISO 9766 |
| ⌀ držala Ds | 40 | 40 |
| Dolžina držala Ls | 68 | 70 |
| Garnitura vijakov za obračalne ploščice | 239700 20IP (6.3 Nm) | 232980 6 (TX15;3Nm) |
| Vrsta izdelka | Indexable drill | Sveder za obračalne ploščice |