{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiPer-Drill base body 17 mm
Article no.: 231610 17
Article code:
- Uitvoering: 5×D
- Schacht: ISO 9766
- Boortoepassing: beperkt dwarsboren; beperkt pakketboren; beperkt schuine uittrede; beperkt schuin aanboren
- Aantal snijkanten Z: 2
- Inwendige koeling: ja
Product details
Technical Data
| Serie | HiPer-Drill | |
| Uitvoering | 5×D | |
| Schacht | ISO 9766 | |
| Boortoepassing | beperkt dwarsboren; beperkt pakketboren; beperkt schuine uittrede; beperkt schuin aanboren | |
| Aantal snijkanten Z | 2 | |
| Inwendige koeling | ja | |
| ⌀-bereik Dc | 17 mm - 17,99 mm | |
| Nuttige lengte L1 | 90 mm | |
| Schacht-⌀ Ds | 20 mm | |
| Schachtlengte Ls | 50 mm | |
| Spanschroef | 231999 8IP1 (1,2 Nm) | |
| Totale lengte L | 168 mm | |
| Producttype | Wisselplaatboor |
Identification numbers & Classifications
| Article number | 231610 17 | |
| EAN / GTIN | 4045197603005 | |
| Manufacturer number | 231610 17 |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.