{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiPer-Drill base body 14,5 mm
Article no.: 231605 14,5
Article code:
- Esecuzione: 3×D
- Codolo: ISO 9766
- Utilizzo foro: per foratura trasversale; per foratura in pacchetti; per uscita obliqua; per foratura obliqua
- Numero taglienti Z: 2
- Passaggio interno per LR: sì
Product details
Technical Data
| Serie | HiPer-Drill | |
| Esecuzione | 3×D | |
| Codolo | ISO 9766 | |
| Utilizzo foro | per foratura trasversale; per foratura in pacchetti; per uscita obliqua; per foratura obliqua | |
| Numero taglienti Z | 2 | |
| Passaggio interno per LR | sì | |
| Campo di ⌀ Dc | 14,5 mm - 14,99 mm | |
| Lunghezza utile L1 | 45 mm | |
| ⌀ Codolo Ds | 16 mm | |
| Lunghezza codolo Ls | 48 mm | |
| Vite di serraggio | 231999 8IP (0,9 Nm) | |
| Lunghezza complessiva L | 117 mm | |
| Tipo di prodotto | Punta a inserti |
Identification numbers & Classifications
| Article number | 231605 14,5 | |
| EAN / GTIN | 4045197602756 | |
| Manufacturer number | 231605 14,5 |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.