{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 3 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 10 mm | |
Overhang L1 | 32 mm | |
Overall length Ltot | 88 mm | |
Shank ⌀ Ds h6 | 25 mm | |
⌀ D3 | 19 mm | |
Circular interpolation milling ⌀ Dmin | 44 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 0.64 degrees | |
Ramping length L for αmax | 18 mm | |
suitable indexable insert | BD.. 11T3 | |
Insert screw | 229708 (T8; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 227305 25/3 | |
EAN / GTIN | 4960664406579 | |
Manufacturer number | THN63183 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Indexable milling cutter 90° MEC11T 25/3 mm
on request
In stock
5 pieces in stock
318,02 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
351,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
328,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Overhang L1 | 32 mm | 49 mm | 49 mm |
Milling application | Circular milling; Ramping; End milling | End milling; Circular milling; Ramping | Circular milling; Ramping; End milling |
Shank type | Weldon shank | Weldon shank | Weldon shank |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm |
Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |
Circular interpolation milling ⌀ Dmin | 44 mm | 47 mm | 47 mm |
Circular interpolation milling ⌀ Dmax | 48 mm | 48 mm | 48 mm |