{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MECX, Plain shank, ⌀ D / number of teeth Z: 10/1mm
Article no.: 227100 10/1
Article code:
- Angle d'attaque κ: 90
- Application de fraisage: Fraisage circulaire; Ramping; Dressage
- Arrosage interne: oui
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Number of cutting edges Z | 1 | |
| Type de queue | Queue cylindrique | |
| Angle d'attaque κ | 90 degré | |
| Application de fraisage | Fraisage circulaire; Ramping; Dressage | |
| Arrosage interne | oui | |
| maximum cutting depth ap max | 6 mm | |
| Overhang L1 | 17 mm | |
| Overall length Ltot | 80 mm | |
| Shank ⌀ Ds h6 | 10 mm | |
| ⌀ D3 | 7 mm | |
| Circular interpolation milling ⌀ Dmin | 17 mm | |
| Circular interpolation milling ⌀ Dmax | 18 mm | |
| Ramping angle αmax | 1.91 degrees | |
| Ramping length L for αmax | 6 mm | |
| suitable indexable insert | BD.. 0703 | |
| Insert screw | 229706 (T6; 0.45 Nm) | |
| Type de produit | Fraise à dresser |
Identification numbers & Classifications
| Article number | 227100 10/1 | |
| EAN / GTIN | 4960664462735 | |
| Manufacturer number | THN03602 |
Description
Description:
Very close spacing provides improved productivity even under more unstable machining conditions. Low cutting forces and high stability for low tendency to vibrate. Permits various milling tasks such as milling shoulders and ramps etc.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable milling cutter 90° MECX, Plain shank, ⌀ D / number of teeth Z: 10/1mm
on request
In stock
3 pieces in stock
214,14 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
BGN 290.14
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length Ltot | 80 mm | 80 mm |
| suitable indexable insert | BD.. 0703 | AP.. 1003.. |
| Cutting edge ⌀ DC | 10 mm | 10 mm |
| Angle d'attaque κ | 90 degré | 90 degrees |
| ⌀ D3 | 7 mm | 7 mm |
| Ramping angle αmax | 1.91 degrees | 2.94 degrees |
| Ramping length L for αmax | 6 mm | 4.85 mm |