{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HELI3MILL shoulder mill 63/7 mm
Article no.: 226486 63/7
Article code:
New product
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HELI3MILL | |
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Overall length Ltot | 45 mm | |
| Mounting bore ⌀ | 22 mm | |
| ⌀ D3 | 59 mm | |
| Circular interpolation milling ⌀ Dmin | 122.4 mm | |
| Circular interpolation milling ⌀ Dmax | 125 mm | |
| Circular interpolation milling ap | 2.9 mm | |
| Ramping angle αmax | 0.9 degrees | |
| Ramping length L for αmax | 515.62 mm | |
| suitable indexable insert | TP..1003.. | |
| Manufacturer's designation | HM390 FTP D063-7-22-10 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226486 63/7 | |
| EAN / GTIN | 7291075314144 | |
| Manufacturer number | 3107284 |
Description
Version:
Reliable shoulder milling system for a wide range of applications. Versions in two system sizes with cutting edge lengths in 10 and 15 mm. Optimally supported Trigon indexable inserts in the seat ensure true 90° shoulders. Ideally suited for circular interpolation milling operations and ramping.
Spare part:
Pack of indexable insert screws No. 229695 1 (TX10; 3.2 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HELI3MILL shoulder mill 63/7 mm
on request
In stock
4 pieces in stock
€769.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
€739.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
€686.55
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 7 | 7 | 7 |
| Milling application | Circular milling ;Ramping ;Plunging | Corner milling | Corner milling |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | TP..1003.. | SO.. 0836.. | LO.U0904.. |
| Setting angle κ | 90 | 90 | 90 |
| Series | HELI3MILL | Softcut® | Power Tang |
| Type of product | End / face mill | End / face mill | End / face mill |