{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 2 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Plunging; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 15 mm | |
Overhang L1 | 29 mm | |
Overall length Ltot | 120 mm | |
Shank ⌀ Ds h6 | 20 mm | |
suitable indexable insert | LOMU.. | |
Indexable insert size | 15 | |
Insert screw | 229714 (15IP; 3.5 Nm) | |
Type of product | End / face mill |
Article number | 225200 25/2L | |
EAN / GTIN | 4960664648245 | |
Manufacturer number | THN05051 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Indexable milling cutter 90° MEW, Plain shank, ⌀ D / number of teeth Z: 25/2Lmm
on request
In stock
3 pieces in stock
€302.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
€335.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
33 pieces in stock
€349.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€326.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
€316.25
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 4 | 2 | 2 |
Milling application | Plunging; End milling | Corner milling; Circular milling; Ramping | Corner milling; Circular milling; Ramping | End milling; Circular milling; Ramping | Circular milling; Ramping; End milling |
Overall length Ltot | 120 mm | 200 mm | 40 mm | 180 mm | 170 mm |
Through-coolant | yes | no | yes | yes | yes |
suitable indexable insert | LOMU.. | AP.. 1805.. | AP.. 1805.. | AP.. 1335.. | AP.. 1003.. |
Cutting edge ⌀ DC | 25 mm | 25 mm | 40 mm | 25 mm | 25 mm |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |