{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 40/7 mm
Article no.: 221965 40/7
Article code:
- Milling application: Plunging; Ramping; Circular milling
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling application | Plunging; Ramping; Circular milling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 33 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| Circular interpolation milling ⌀ Dmin | 73 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Ramping angle αmax | 0.55 degrees | |
| Ramping length L for αmax | 31.3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Setting angle κ | 15 degrees | |
| Fz Helix | 0.8 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221965 40/7 | |
| EAN / GTIN | 2050001942012 | |
| Manufacturer number | TX781475 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 40/7 mm
on request
In stock
30 pieces in stock
503,03 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
428,95 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 7 | 7 |
| Setting angle κ | 15 | 20 |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 40 | 40 |
| Circular interpolation milling ⌀ Dmax | 78 | 78 |
| Ramping angle αmax | 0.55 | 0.62 |
| Ramping length L for αmax | 31.3 | 32.4 |