{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Shank type | Weldon shank | |
Chamfering angle forwards | 60 degrees | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
Number of cutting edges Z | 2 | |
⌀ D | 15.8 mm | |
maximum chamfering ⌀ Dmax | 26 mm | |
Overhang L1 | 35 mm | |
Overall length Ltot | 90 mm | |
Shank ⌀ Ds h6 | 20 mm | |
suitable indexable insert | 260982 HB725-1 | |
Insert screw | 219795 1 (8IP; 1.2 Nm) | |
Type of product | Indexable end mill |
Article number | 216552 16 | |
EAN / GTIN | 4045197851741 | |
Manufacturer number | 216552 16 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() Chamfer mill 60° 16
on request
In stock
40 pieces in stock
€148.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
73 pieces in stock
€330.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
33 pieces in stock
€508.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
€193.78
plus VAT at the current rate
Prices plus delivery costs
|
|
⌀ D | 15.8 | 16 | 16 | 16 |
Number of cutting edges Z | 2 | 2 | 5 | 2 |
Overhang L1 | 35 | 20.5 | 20 | 32 |
Overall length Ltot | 90 | 110 | 110 | 100 |
Through-coolant | yes | yes | yes | no |
maximum chamfering ⌀ Dmax | 26 | 28.3 | 22.7 | 28.8 |
Shank type | Weldon shank | Weldon shank | Plain shank | Weldon shank |