{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Power Tang | |
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 4 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Corner milling | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum cutting depth ap max | 8 mm | |
Overhang L1 | 30 mm | |
Overall length Ltot | 120 mm | |
Shank ⌀ Ds h6 | 25 mm | |
suitable indexable insert | LO.U0904.. | |
Pack of insert screws | 219868 2 (8IP; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 215956 25/4 | |
EAN / GTIN | 4045197939920 | |
Manufacturer number | 215956 25/4 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() GARANT Power Tang 90° tangential high-performance shoulder mill close pitch 25/4 mm
on request
In stock
7 pieces in stock
€426.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
€379.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
€433.55
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 4 | 4 | 4 |
Overhang L1 | 30 mm | 25 mm | 50 mm |
Milling application | Corner milling | End milling; Circular milling; Ramping | End milling |
suitable indexable insert | LO.U0904.. | AP.. 1335.. | XNEX 040308 |
Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees |
Type of product | End / face mill | End / face mill | End / face mill |