{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Softcut® | |
Cutting edge ⌀ DC | 100 mm | |
Number of cutting edges Z | 10 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Corner milling | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum cutting depth ap max | 6 mm | |
Overall length Ltot | 50 mm | |
Mounting bore ⌀ | 32 mm | |
suitable indexable insert | SO.. 0836.. | |
Pack of insert screws | 219863 (8IP; 2.2 Nm) | |
Type of product | End / face mill |
Article number | 214908 100/10 | |
EAN / GTIN | 4045197674692 | |
Manufacturer number | 214908 100/10 |
This article |
Recommendations |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
GARANT Softcut HSI close pitch, with bore, ⌀ D / number of teeth Z: 100/10mm
on request
In stock
26 pieces in stock
€1,003.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€906.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
€1,028.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€867.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
€877.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€711.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
€717.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
19 pieces in stock
€571.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€595.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
€792.35
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 10 | 8 | 10 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
Overall length Ltot | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm | 50 mm |
Through-coolant | yes | yes | yes | yes | yes | yes | yes | yes | yes | yes |
suitable indexable insert | SO.. 0836.. | SO.. 1205.. | SO.. 1205.. | SO.. 0836.. | SOMT 09T304 | AP.. 1805.. | AP.. 16.. | SOMT 09T304 | XNEX 0806.. | XNEX 0806.. |
Shank type | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore | with bore |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |