{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
TwinCut indexable face mill 45° close pitch 63/6 mm
Article no.: 213420 63/6
Article code:
- Number of cutting edges Z: 6
- Setting angle κ: 45
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Series | TwinCut | |
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum external ⌀ Dmax for ON.U inserts | 74.8 mm | |
| maximum external ⌀ Dmax for SN.U inserts | 78.2 mm | |
| Overall length Ltot for SN.U inserts | 40 mm | |
| Overall length Ltot for ON.U inserts | 38.3 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SN.U; ON.U | |
| Pack of insert screws | 219898 (15IP; 3.8 Nm) | |
| Shim | 219897 | |
| Clamp screw for shim | 219899 | |
| Type of product | Face mill |
Identification numbers & Classifications
| Article number | 213420 63/6 | |
| EAN / GTIN | 4045197716835 | |
| Manufacturer number | 213420 63/6 |
Description
Version:
From ⌀ 160 mm for arbors to DIN 2079, with 4 additional attachment holes and without internal cooling.
Application:
With double-sided 8-edge inserts (ON.U) or 4-edge inserts (SN.U).
Spare part:
Shim No. 219897 for use with both types of indexable insert.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
TwinCut indexable face mill 45° close pitch 63/6 mm
on request
In stock
17 pieces in stock
707,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
524,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
524,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
501,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 6 | 6 | 6 |
| Mounting bore ⌀ | 22 | 22 | 22 | 22 |
| Through-coolant | yes | yes | no | yes |
| suitable indexable insert | SN.U ;ON.U | SE.. 1204.. | SE.. 1204.. | SE.T1305 ;XEEW1305 |
| Shank type | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 63 | 63 | 63 | 63 |
| Type of product | Face mill | Face mill | Face mill | Face mill |