{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide micro Woodruff keyseating cutter, AlTiN, ⌀ DC × LC: 5,8X0,5mm
Article no.: 208033 5,8X0,5
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: ±0.04
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 5.8 mm | |
| Flute length Lc | 0.5 mm | |
| Coating | AlTiN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | ±0.04 | |
| No. of teeth Z | 3 | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Overhang L1 | 15 mm | |
| Recess ⌀ D1 | 3.8 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | green | |
| Type of product | Slot milling cutter |
Identification & Classification
| Article number |
208033 5,8X0,5
Copy |
|
| EAN / GTIN |
4062406774493
Copy |
|
| Manufacturer number |
208033 5,8X0,5
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
300
suitable for / [m/min]
P
ISO code:
220
suitable for / [m/min]
P
ISO code:
190
suitable for / [m/min]
P
ISO code:
160
suitable for / [m/min]
P
ISO code:
150
suitable for / [m/min]
P
ISO code:
100
suitable for / [m/min]
M
ISO code:
100
suitable for / [m/min]
K
ISO code:
180
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Particularly suitable for slot milling and circular milling in holes. With optimised coating for universal application in virtually all materials.
Tolerance, nominal diameter DC = +/- 0.04 mm.
Tolerance, cutter length LC = +/- 0.02 mm.
Tolerance, nominal diameter DC = +/- 0.04 mm.
Tolerance, cutter length LC = +/- 0.02 mm.
Minimum hole diameter is 6 mm.
Note:
Always use climb milling. Engage loop of 180° to achieve the full depth of cut. Make sure the depth of the slot is linear.
aemax = 0.1×D.
aemax = 0.1×D.