{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu solid carbide milling cutter, HPC HPC, uncoated, ⌀ e8 DC: 20mm
Article no.: 203207 20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 5 | |
| Helix angle | 38 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 60 mm | |
| Overhang length L1 incl. recess | 70 mm | |
| Recess ⌀ D1 | 19.5 mm | |
| Overall length L | 125 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203207 20 | |
| EAN / GTIN | 4062406565909 | |
| Manufacturer number | 203207 20 |
Application Table
N
550
N
500
N
450
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
For finishing operations.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Master Alu solid carbide milling cutter, HPC HPC, uncoated, ⌀ e8 DC: 20mm
on request
Available in 2-3 weeks
0 pieces in stock
€438.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
35 pieces in stock
€445.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
€224.83
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
€464.60
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | TiAlN | TiAlN | DLC |
| Through-coolant | no | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Flute length Lc | 60 mm | 60 mm | 60 mm | 60 mm |
| Type | W | N | N | W |
| No. of teeth Z | 5 | 7 | 6 | 5 |