{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC 14 mm
Article no.: 203037 14
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Helix angle characteristic: unequal spacing
- Spacing of the cutters: unequal spacing
Product details
Technical Data
| Coating | TiXSi | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203037 14 | |
| EAN / GTIN | 4045197679291 | |
| Manufacturer number | 203037 14 |
Application Table
P
250
P
200
P
180
P
160
M
70
K
120
Description
Version:
For roughing and finishing.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)!
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)!
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide roughing end mill HPC 14 mm
on request
In stock
121 pieces in stock
€90.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
€216.78
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€196.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
€146.05
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiXSi | TiAlN | TiAlN | TiAlN |
| Corner chamfer angle | 45 degrees | |||
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 38 degrees | |||
| Machining strategy | HPC | HPC | MTC | HPC |
| Direction of infeed | horizontal, oblique and vertical | |||