{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC 6 mm
Article no.: 203031 6
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Helix angle characteristic: unequal spacing
- Spacing of the cutters: unequal spacing
Product details
Technical Data
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203031 6 | |
| EAN / GTIN | 4045197510457 | |
| Manufacturer number | 203031 6 |
Application Table
P
250
P
200
P
180
P
160
M
70
M
50
K
120
Description
Version:
For roughing and finishing.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum boring depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)!
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum boring depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ DC (cutting ⌀)!
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 203034.
Recommended successor product is No. 203034.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide roughing end mill HPC 6 mm
on request
In stock
33 pieces in stock
53,94 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
201 pieces in stock
28,64 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6,692 pieces in stock
25,07 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
220 pieces in stock
47,61 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
108 pieces in stock
77,74 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
486 pieces in stock
41,63 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | green | green | green | green | green | green |
| Overall length L | 54 mm | 54 mm | 54 mm | 54 mm | ||
| Through-coolant | no | no | no | no | no | no |
| Cutting edge ⌀ DC | 6 mm | 6 mm | 6 mm | 6 mm | ||
| Helix angle | 38 degrees | 38 degrees | 42 degrees | 45 degrees | ||
| Corner chamfer width at 45° | 0.2 mm | 0.12 mm | 0.3 mm | 0.3 mm | ||
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |