{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master INOX | |
Cutting edge ⌀ DC | 8 mm | |
Coating | TiAlN | |
Tool material | solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 4 | |
Helix angle | 40 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D | |
Shank | DIN 6535 HB to h6 | |
Through-coolant | yes | |
Machining strategy | HPC; TPC | |
Flute length Lc | 19 mm | |
Overhang length L1 incl. recess | 29 mm | |
Recess ⌀ D1 | 7.5 mm | |
Overall length L | 63 mm | |
Shank ⌀ Ds | 8 mm | |
Corner chamfer width at 45° | 0.25 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in stainless steel > 900 N/mm2 | 0.025 mm | |
Feed fz for side milling in INOX > 900 N/mm2 | 0.04 mm | |
Colour ring | blue | |
Type of product | End / face mill |
Article number | 202999 8 | |
EAN / GTIN | 4062406233679 | |
Manufacturer number | 202999 8 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
GARANT Master INOX solid carbide milling cutter HPC / TPC, TiAlN, ⌀ h10 DC: 8mm
on request
In stock
54 pieces in stock
135,13 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
146 pieces in stock
147,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
47 pieces in stock
116,73 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
162 pieces in stock
133,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
62 pieces in stock
114,31 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 Grad |
Colour ring | blue | blue | blue | green | blue |
Standard | DIN 6527 | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB mit h6 |
Helix angle | 40 degrees | 38 degrees | 35 degrees | 45 degrees | 35 Grad |
Corner chamfer width at 45° | 0.25 mm | 0.2 mm | 0.2 mm | 0.2 mm | 0,2 mm |
Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |