{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 3 mm
Article no.: 202820 3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 35 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.1×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.04 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.01 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.011 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202820 3 | |
| EAN / GTIN | 4045197662729 | |
| Manufacturer number | 202820 3 |
Application Table
N
110
N
80
P
50
P
45
P
40
P
35
P
25
M
35
K
55
Description
Version:
Double relief ground side clearance angle.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter 3 mm
on request
In stock
89 pieces in stock
€36.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
342 pieces in stock
€21.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
551 pieces in stock
€15.99
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 75 | 38 | 45 |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | HB with h6 |
| Cutting edge ⌀ DC | 3 | 3 | 3 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Shank ⌀ Ds | 3 | 3 | 6 |
| Type of product | End / face mill | End / face mill | End / face mill |