{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Steel | |
Cutting edge ⌀ DC | 0.8 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 2 mm | |
Overall length L | 38 mm | |
Shank ⌀ Ds | 3 mm | |
Corner chamfer width at 45° | 0.01 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.003 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0.005 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 202295 0,8 | |
EAN / GTIN | 4062406271268 | |
Manufacturer number | 202295 0,8 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
![]() ![]() GARANT Master Steel solid carbide mini milling cutter HPC 0,8 mm
on request
In stock
260 pieces in stock
24,73 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
124 pieces in stock
19,84 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
353 pieces in stock
24,15 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
215 pieces in stock
20,76 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
320 pieces in stock
16,16 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
175 pieces in stock
20,76 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Colour ring | green | without | without | without | without | without |
Through-coolant | no | no | no | no | no | no |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | Parallel shank to h6 | Parallel shank to h6 | Parallel shank to h6 |
Cutting edge ⌀ DC | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
Flute length Lc | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm | 2 mm |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |