{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill 20 mm
Article no.: 201650 20
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 38 mm | |
| Overall length L | 104 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.1 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.12 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201650 20 | |
| EAN / GTIN | 4045197113641 | |
| Manufacturer number | 201650 20 |
Application Table
N
280
N
200
P
120
P
105
P
100
M
80
M
60
K
90
Description
Version:
Eccentric relief ground for stronger cutting edges.
Dimensions similar to DIN 6527.
Dimensions similar to DIN 6527.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide slot drill 20 mm
on request
In stock
26 pieces in stock
146,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
319,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
399,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
311,65 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.05×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm |
| Flute length Lc | 38 mm | 38 mm | 38 mm | 38 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | solid carbide |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm |