{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill MTC HSS-E-SPM, TiAlN, ⌀ k12 DC: 8mm
Article no.: 192895 8
Article code:
- Tool material: HSS E SPM
- Standard: DIN 844
- Milling profile: HRF
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | HSS E SPM | |
| Standard | DIN 844 | |
| Milling profile | HRF | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 19 mm | |
| Overall length L | 69 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 1100 N/mm2 | 0.02 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192895 8 | |
| EAN / GTIN | 4045197359483 | |
| Manufacturer number | 192895 8 |
Application Table
P
95
P
75
P
75
P
40
P
35
M
25
M
20
S
14
Description
Version:
SPM substrate with very high cobalt content. Combines the hardness of solid carbide with the toughness of PM steel. Dynamic special knuckle profile for roughing.
For use as a universal roughing end mill Centre cutting edge geometry for plunging.
For use as a universal roughing end mill Centre cutting edge geometry for plunging.
Application:
For very high metal removal rates and increased machining volumes. Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Roughing end mill MTC HSS-E-SPM, TiAlN, ⌀ k12 DC: 8mm
on request
In stock
86 pieces in stock
87,86 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
54,74 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
77 pieces in stock
49,11 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
113 pieces in stock
69,23 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
40 pieces in stock
81,42 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
261 pieces in stock
35,77 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Colour ring | green | green | green | blue | blue | green |
| Overall length L | 69 mm | 61 mm | 69 mm | 61 mm | 69 mm | 69 mm |
| Flute length Lc | 19 mm | 11 mm | 19 mm | 11 mm | 19 mm | 19 mm |
| Tool material | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM |
| Helix angle | 45 degrees | 25 degrees | 30 degrees | 30 degrees | 30 degrees | 38 degrees |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |