{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 14mm
Article no.: 191720 14
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 14 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 27-30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.042 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191720 14 | |
| EAN / GTIN | 4045197104977 | |
| Manufacturer number | 191720 14 |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Size 10 − 30 centre cutting teeth for plunging.
or a considerable performance improvement with special ground chip breaker flutes.
or a considerable performance improvement with special ground chip breaker flutes.
Advantage:
The chip breaker flutes facilitate chip evacuation and at the same time ensure a good component surface finish.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Semi-roughing end mill, TiAlN, ⌀ k12 DC: 14mm
on request
In stock
93 pieces in stock
€86.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
145 pieces in stock
€42.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
66 pieces in stock
€80.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
154 pieces in stock
€47.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
105 pieces in stock
€54.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
268 pieces in stock
€43.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
69 pieces in stock
€74.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
104 pieces in stock
€64.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
351 pieces in stock
€44.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
€50.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€65.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
€102.81
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 45 degrees |
| Through-coolant | no | no | no | no | no | no | no | no | no | no | no | no |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Flute length Lc | 26 mm | 26 mm | 26 mm | 26 mm | 26 mm | 26 mm | 26 mm | 53 mm | 26 mm | 26 mm | 35 mm | 26 mm |
| Tolerance nominal ⌀ | k12 | e8 | e8 | e8 | e8 | k10 | k10 | k10 | k10 | k12 | js12 | k10 |
| No. of teeth Z | 4 | 3 | 3 | 3 | 3 | 4 | 4 | 5 | 4 | 4 | 4 | 4 |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 16 mm | 12 mm |