{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-Co8, uncoated, ⌀ k10 DC: 7,5mm
Article no.: 191500 7,5
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: k10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 7.5 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 4 | |
| Helix angle | 30-40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 66 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.014 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191500 7,5 | |
| EAN / GTIN | 4045197102867 | |
| Manufacturer number | 191500 7,5 |
Application Table
N
83
P
30
P
25
P
25
K
23
N
55
Description
Version:
Multi-flute end mill. Eccentric relief ground.
Centre cutting edge geometry for plunging.
Centre cutting edge geometry for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
End mill HSS-Co8, uncoated, ⌀ k10 DC: 7,5mm
on request
In stock
79 pieces in stock
19,61 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
174 pieces in stock
21,05 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
11,27 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
307 pieces in stock
29,44 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | TiAlN |
| Overall length L | 66 mm | 66 mm | 42 mm | 42 mm |
| Standard | DIN 844 B | DIN 844 B | Manufacturer’s standard | Manufacturer’s standard |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM |
| Tolerance nominal ⌀ | k10 | e8 | e8 | e8 |
| No. of teeth Z | 4 | 3 | 3 | 3 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |