{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 5,5mm
Article no.: 164180 5,5
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 5.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 5.060 mm - 5.600 mm | |
| Flute length Lc | 26 mm | |
| Overhang L1 | 68 mm | |
| Overall length L | 138 mm | |
| Number of cutting edges Z | 6 | |
| Morse taper MT size | 1 | |
| Feed f in steel < 750 N/mm2 | 0.1 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X; ZC; Z; ZA | |
| Configurable qualities | 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 5,5 | |
| EAN / GTIN | 4045197092182 | |
| Manufacturer number | 164180 5,5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 5,5mm
on request
Available in 1-2 weeks
0 pieces in stock
99,82 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
23,46 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
63,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
52,44 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | uncoated |
| Colour ring | without | green | without | without |
| Through-coolant | no | no | no | no |
| Nominal ⌀ DC | 5.5 mm | 5.5 mm | 5.5 mm | 5.5 mm |
| Shank | Morse taper | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 |
| Flute length Lc | 26 mm | 26 mm | 26 mm | 26 mm |
| Tool material | HSS E | HSS E | HSS E | HSS E |