{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC reamer Configurable, uncoated, Nominal ⌀ DC: 3,5mm
Article no.: 162951 3,5
Article code:
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 3.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| ⌀ range | 3.360 mm - 3.750 mm | |
| Flute length Lc | 18 mm | |
| Overhang L1 | 39 mm | |
| Overall length L | 75 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm | |
| Shank tolerance | h6 | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X; ZC; Z; ZA | |
| Configurable qualities | 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162951 3,5 | |
| EAN / GTIN | 4045197366054 | |
| Manufacturer number | 162951 3,5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
NC reamer Configurable, uncoated, Nominal ⌀ DC: 3,5mm
on request
Available in 1-2 weeks
0 pieces in stock
€51.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
167 pieces in stock
€21.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
€44.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
€123.63
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 39 mm | 42 mm | 38 mm | 42 mm |
| Coating | uncoated | uncoated | uncoated | uncoated |
| Overall length L | 75 mm | 70 mm | 70 mm | 114.8 mm |
| Nominal ⌀ DC | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm |
| Shank | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 | Morse taper |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.08 mm/rev. |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit |