{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap for synchronised spindles HSS-E-PM Form C M8
Article no.: 132555 M8
Article code:
- Flank angle: 60
- Thread standard: DIN 13
- Taper lead form: C
- Shank: DIN 1835 B with h6
- Through-coolant: no
Product details
Technical Data
| Coating | TiAlN | |
| Flank angle | 60 degrees | |
| Thread standard | DIN 13 | |
| Taper lead form | C | |
| Shank | DIN 1835 B with h6 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes; up to 2.5×D for through holes | |
| Cutting direction | right-hand | |
| Shank tolerance | h6 | |
| Type of threading tool | Machine tap for synchronous machining | |
| Colour ring | white | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132555 M8 | |
| Manufacturer number | 132555 M8 |
Application Table
K
20
Description
Version:
Sturdy design with shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine.
Special TiAlN coating for optimum tool life. For use with emulsion (fat content minimum 8 %).
Also outstandingly suitable for bainite cast iron (ADI).
Special TiAlN coating for optimum tool life. For use with emulsion (fat content minimum 8 %).
Also outstandingly suitable for bainite cast iron (ADI).