{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 132280 M10
Machine tap for synchronised spindles HSS-E-PM internal cooling M10
Article no.: 132285 M10
Article code:
Click to enlarge image
Click to enlarge image
The spiral point evacuates the swarf in the cutting direction.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M10 | |
| Coating | TiAlN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Shank | DIN 1835 B with h6 | |
| Through-coolant | yes | |
| Application for type of drilling | up to 2.5×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8.5 mm | |
| Thread ⌀ | 10 mm | |
| Shank tolerance | h6 | |
| Type of threading tool | Machine tap for synchronous machining | |
| Number of clamping slots | 3 | |
| Colour ring | blue | |
| Number of cutting edges Z | 3 | |
| Thread depth | 25 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132285 M10 | |
| Manufacturer number | 132285 M10 |
Application Table
N
40
P
37
P
35
P
22
M
12
M
10
N
35
Description
Version:
Sturdy design with spiral point and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. Special TiAlN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%).
With internal coolant supply for maximum tool life.
With internal coolant supply for maximum tool life.