{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide centre drills A 1,25 mm
Article no.: 121001 1,25
Article code:
- Tool material: Solid carbide
- Standard: DIN 333
- Type: A
- Tolerance nominal ⌀: k13
- Countersink angle: 60
Product details
Technical Data
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 333 | |
| Type | A | |
| Tolerance nominal ⌀ | k13 | |
| Countersink angle | 60 degrees | |
| Cutting direction | right-hand | |
| Shank | Parallel shank to h6 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Nominal ⌀ DC | 1.25 mm | |
| for workpiece ⌀ | 8 − 10 mm | |
| Shank ⌀ Ds | 3.15 mm | |
| Shank tolerance | h6 | |
| Overall length L | 31.5 mm | |
| Feed f in steel < 1100 N/mm2 | 0.02 mm/rev. | |
| Colour ring | without | |
| Type of product | Centre drill |
Identification numbers & Classifications
| Article number | 121001 1,25 | |
| EAN / GTIN | 4045197594587 | |
| Manufacturer number | 121001 1,25 |
Application Table
P
60
P
40
H
20
H
15
H
10
Description
Version:
Ground from solid carbide bar. Spiral fluted.
For materials up to 62 HRC.
For materials up to 62 HRC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide centre drills A 1,25 mm
on request
In stock
43 pieces in stock
€84.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,240 pieces in stock
€4.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,437 pieces in stock
€3.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
519 pieces in stock
€5.43
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
598 pieces in stock
€8.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
67 pieces in stock
€53.13
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
| for workpiece ⌀ | 8 − 10 | 8 − 10 | 8 − 10 | 8 − 10 | 8 − 10 | 8 − 10 |
| Overall length L | 31.5 | 31.5 | 31.5 | 31.5 | 40 | 31.5 |
| Standard | DIN 333 | DIN 333 | DIN 333 | DIN 333 | DIN 333 | DIN 333 |
| Shank tolerance | h6 | h7 | h7 | h7 | h7 | h6 |
| Shank ⌀ Ds | 3.15 | 3.15 | 3.15 | 3.15 | 5 | 3.15 |
| Type of product | Centre drill | Centre drill | Centre drill | Centre drill | Centre drill | Centre drill |