{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide hole saw flat, ⌀ DC: 44mm
Article no.: 118505 44
Article code:
- Tool material: Carbide
- Standard: Manufacturer’s standard
- Shank: Three drive flats shank
- ⌀ tolerance: −0.05 / 0.15
Product details
Technical Data
| Nominal ⌀ DC | 44 mm | |
| Version | flat | |
| Tool material | Carbide | |
| Standard | Manufacturer’s standard | |
| Shank | Three drive flats shank | |
| Shank ⌀ | 10 mm | |
| ⌀ tolerance | −0.05 / 0.15 mm | |
| Length L | 11.8 mm | |
| Colour ring | without | |
| Type of product | Hole saw |
Identification & Classification
| Article number | 118505 44 | |
| EAN / GTIN | 4045197956828 | |
| Manufacturer number | 118505 44 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 1.9 mm for all sizes. ⌀ tolerance: + 0.15 / − 0.05 mm.
Dimension L: all sizes = 11.8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 1.9 mm for all sizes. ⌀ tolerance: + 0.15 / − 0.05 mm.
Dimension L: all sizes = 11.8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 5 mm thickness.
Only for flat material up to 5 mm thickness.