{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide hole saw flat 43 mm
Article no.: 118500 43
Article code:
- Snijmateriaal: HM
- Norm: Fabrieksnorm
- Schacht: Drie-spanvlakkenschacht
- ⌀-Tolerantie: -0,05 / 0,1
Product details
Technical Data
| Nominale ⌀ DC | 43 mm | |
| Uitvoering | plat | |
| Snijmateriaal | HM | |
| Norm | Fabrieksnorm | |
| Schacht | Drie-spanvlakkenschacht | |
| Schacht-⌀ | 10 mm | |
| ⌀-Tolerantie | -0,05 / 0,1 mm | |
| Lengte L | 8 mm | |
| Gekleurde ring | zonder | |
| Producttype | Gatzaag |
Identification numbers & Classifications
| Article number | 118500 43 | |
| EAN / GTIN | 4045197037350 | |
| Manufacturer number | 118500 43 |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
on request
In stock
25 pieces in stock
€ 36,30
plus VAT at the current rate
Prices plus delivery costs
|
|||
| ⌀-Tolerantie | -0,05 / 0,1 | −0.05 / 0.1 | −0,05 / 0,15 |
| Uitvoering | plat | high | plat |
| Gekleurde ring | zonder | without | zonder |
| Lengte L | 8 | 35 | 11,8 |
| Nominale ⌀ DC | 43 | 43 | 43 |
| Schacht | Drie-spanvlakkenschacht | Three drive flats shank | Drie-spanvlakkenschacht |
| Producttype | Gatzaag | Hole saw | Gatzaag |