{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill with stepped tip HSS-E Stainless steel, uncoated, ⌀ DC h8: 9,5mm
Article no.: 114008 9,5
Article code:
- Tool material: HSS E
- Standard: DIN 338
- Type: INOX
- Tolerance nominal ⌀: h8
- Point angle: 118
Offers
Product details
Technical Data
| Nominal ⌀ DC | 9.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 338 | |
| Type | INOX | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Three drive flats shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 66.8 mm | |
| Flute length Lc | 81 mm | |
| Overall length L | 125 mm | |
| Shank ⌀ Ds | 9.5 mm | |
| Feed f in steel < 750 N/mm2 | 0.16 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 114008 9,5 | |
| EAN / GTIN | 4062406877187 | |
| Manufacturer number | 114008 9,5 |
Application Table
N
70
N
70
N
50
P
35
P
32
P
25
P
15
M
14
M
12
K
30
N
50
Description
Version:
Chamfers are nitrided. Particularly sturdy and robust due to the strengthened core diameter. Ground flutes, with high concentricity. Precision ground point. Three drive flats on the shank for use in a 3-jaw chuck.
With special cutter geometry also for use in stainless steels.
- Ideal for producing precise holes in sheet metal, pipes, and profiles.
- Reliable spot drilling without centring or centre punching – even on curved surfaces – thanks to innovative ground point.
- Oblique drilling possible without any problems after the first level of the drill tip has penetrated the material.
- Drilling with significantly less force required than with conventional DIN338 HSS drills – up to a diameter of 13 mm directly in the cordless drill/driver.
- Stable and secure form fit in the 3-jaw chuck.
- General use across a wide spectrum of materials including plastic, wood and acrylic without tearing or splintering.
- The drill does not rattle or dig in – even in the case of thin-walled materials.
- Burr-free drill exit.
- Ideal for drilling out bolts and rivets.
With special cutter geometry also for use in stainless steels.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.