{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 14.5 mm | |
Coating | uncoated | |
Tool material | HSS E | |
Standard | DIN 338 | |
Type | N | |
Tolerance nominal ⌀ | h8 | |
Point angle | 130 degrees | |
Shank | Three drive flats shank | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
recommended maximum drilling depth L2 | 92.3 mm | |
Flute length Lc | 114 mm | |
Overall length L | 169 mm | |
Shank ⌀ Ds | 9.5 mm | |
Feed f in steel < 900 N/mm2 | 0.16 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 114001 14,5 | |
EAN / GTIN | 4045197750143 | |
Manufacturer number | 114001 14,5 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Jobber drill with 3 clamping faces HSS-E, uncoated, ⌀ DC h8: 14,5mm
on request
In stock
39 pieces in stock
€31.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
from
1
Pieces
€58.37
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
€48.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
from
1
Pieces
€53.41
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
€44.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
44 pieces in stock
from
1
Pieces
€65.00
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
€54.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
137 pieces in stock
€44.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
€33.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
120 pieces in stock
from
1
Pieces
€21.80
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
€18.17
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Overall length L | 169 mm | 111 mm | 111 mm | 111 mm | 169 mm | 111 mm | 111 mm |
Nominal ⌀ DC | 14.5 mm | 14.5 mm | 14.5 mm | 14.5 mm | 14.5 mm | 14.5 mm | 14.5 mm |
Shank | Three drive flats shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank | Plain shank |
Point angle | 130 degrees | 135 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 118 degrees |
Tolerance nominal ⌀ | h8 | h8 | h8 | h8 | h8 | h8 | h8 |
Shank ⌀ Ds | 9.5 mm | 14.5 mm | 14.5 mm | 14.5 mm | 14.5 mm | 9.5 mm | 14.5 mm |