{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 7 mm | |
Coating | uncoated | |
Tool material | HSS | |
Type | N | |
Tolerance nominal ⌀ | h8 | |
Point angle | 118 degrees | |
Shank | Plain shank | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
recommended maximum drilling depth L2 | 58.5 mm | |
Flute length Lc | 69 mm | |
Overall length L | 109 mm | |
Shank ⌀ Ds | 7 mm | |
Feed f in steel < 750 N/mm2 | 0.07 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 114000 7 | |
EAN / GTIN | 4045197009104 | |
Manufacturer number | 114000 7 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
![]() ![]() HSS jobber drill roll forged N 7 mm
on request
In stock
3,537 pieces in stock
1,32 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,765 pieces in stock
from
1
Pieces
3,25 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
2,71 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4,297 pieces in stock
from
1
Pieces
7,87 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
6,56 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7,977 pieces in stock
from
1
Pieces
7,25 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
6,04 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5,905 pieces in stock
from
1
Pieces
4,01 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
3,35 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
451 pieces in stock
from
1
Pieces
8,28 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
6,90 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Through-coolant | no | no | no | no | no | no |
Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Three drive flats shank |
Tool material | HSS | HSS | HSS | HSS | HSS | HSS |
Tolerance nominal ⌀ | h8 | h8 | h8 | h8 | h8 | h8 |
Type | N | N | N | N | N | N |
Shank ⌀ Ds | 7 mm | 7 mm | 7 mm | 7 mm | 7 mm | 7 mm |
recommended maximum drilling depth L2 | 58.5 mm | 58.5 mm | 58.5 mm | 58.5 mm | 58.5 mm | 58.5 mm |