{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 4 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | W | |
Tolerance nominal ⌀ | h6 | |
No. of teeth Z | 5 | |
Helix angle | 38 degrees | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal | |
Cutting width ae for milling operation | 0.1×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 16 mm | |
Overhang length L1 incl. recess | 23 mm | |
Recess ⌀ D1 | 3.8 mm | |
Overall length L | 65 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 203203 4 | |
EAN / GTIN | 4062406119355 | |
Manufacturer number | 203203 4 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
GARANT Master Alu solid carbide milling cutter, HPC HPC, DLC, ⌀ h6 DC: 4mm
on request
In stock
110 pieces in stock
€79.58
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
463 pieces in stock
€33.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
83 pieces in stock
€76.36
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
334 pieces in stock
€25.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
€31.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 2-3 weeks
0 pieces in stock
€70.38
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | DLC | TiAlN | TiAlN | TiAlN | TiAlN | uncoated |
Through-coolant | no | no | no | no | no | no |
Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm | 4 mm |
No. of teeth Z | 5 | 6 | 7 | 6 | 6 | 5 |
Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |