{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench without scale 6 N·m
Article no.: 657320 6
Article code:
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±3
Product details
Technical Data
| maximum torque | 6 Nm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±3 % | |
| Series | QSP | |
| Overall length L | 185 mm | |
| Torque range | 1 Nm - 6 Nm | |
| Weight | 190 g | |
| Square drive | 1/4 in | |
| Release signalling | akustisk; haptisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Deflection function | no | |
| Slipper function | no | |
| Memory pointer | no | |
| Data can be recorded | no | |
| Setting the trigger value | without setting scale (requires torque analyser) | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 120 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 657320 6 | |
| EAN / GTIN | 4562135128555 | |
| Manufacturer number | QSP6N4 |
Description
Version:
Single-handed torque wrenches without a setting scale. Wrench setting using torque analyser.
With synthetic resin handle.
Fixed reversible ratchet.
Fixed reversible ratchet.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a ″signal″ (audible and perceptible) and is then immediately ready for use again.
Application:
For controlled screw tightening etc. to specified torques in series production.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
Suitable setting tools No. 657325.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
|
Torque wrench without scale 6 N·m |
|||
| Square drive | 1/4 | 1/4 | 1/4 |
| Direction of tightening | Right-hand tightening | For right and left-hand tightening | For right and left-hand tightening |
| Overall length L | 185 | 225 | 225 |
| Weight | 190 | 400 | 300 |
| maximum torque | 6 | 6 | 6 |
| Torque measuring accuracy | ±3 | ±4 | ±4 |
| Connection format | Push-through square drive (ratchet) | Push-through square drive (ratchet) | Push-through square drive (ratchet) |