{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench Standard MANOSKOP® 721 with ratchet 800 N·m
Article no.: 657220 800
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±4
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 800 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±4 % | |
| Test certificate | Manufacturer’s test certificate | |
| Series | MANOSKOP® 721Nf | |
| Overall length L | 1,051 mm | |
| Head width b | 76 mm | |
| Head height h | 42 mm | |
| Torque range | 160 Nm - 800 Nm | |
| Torque range | 120 lbfft - 600 lbfft | |
| Scale graduation, 1 graduation = | 20 Nm | |
| Weight | 6,380 g | |
| Square drive | 3/4 in | |
| Display | analogue | |
| Release signalling | akustisk; haptisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 938 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 657220 800 | |
| EAN / GTIN | 4018754031979 | |
| Manufacturer number | 50200081 |
Description
Version:
Sturdy compact, torque wrench, adjustable to scale (Nm and lbfft) and self-triggering. The accuracy is sustained for many thousands of operations, because high quality material is used for all wearing parts and the flexible rod is under load only briefly on each occasion. It returns immediately to an off-position after the torque has been achieved. Body and handle are of sturdy square section.
Units of measure: Nm, lbfft.
Units of measure: Nm, lbfft.
With push-through square for right-hand and left-hand tightening.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application:
The quick setting features makes it ideal for repairs and small series production.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
|
Torque wrench Standard MANOSKOP® 721 with ratchet 800 N·m |
||
| Weight | 6,380 | 6,300 |
| maximum torque | 800 | 800 |
| Torque measuring accuracy | ±4 | ±3 |
| Scale graduation, 1 graduation = | 20 | 2.5 |
| Connection format | Push-through square drive (ratchet) | Push-through square drive (ratchet) |
| Feedback | triggering | triggering |
| Adjustable trigger value | adjustable | adjustable |