{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Radio 3D edge finder, digital, with contact point (⌀ 4 mm) XTOUCH 4 mm
Article no.: 359450 4
Article code:
- IP Index of Protection: IP 67
Product details
Technical Data
| IP Index of Protection | IP 67 | |
| Series | XTOUCH | |
| Shank ⌀ | 16 mm | |
| Scale divisions | 0.005 mm | |
| Measuring accuracy | < 0.01 mm | |
| Displacement travel x, y, z respectively | 7 mm | |
| Body length | 82 mm | |
| Body depth | 39 mm | |
| Body width | 67 mm | |
| free length contact point | 40 mm | |
| Overall length (body and contact point) | 134 mm | |
| Adjustment travel | ±0.4 mm | |
| Weight | 0.52 kg | |
| Spare contact point | 359505 4 | |
| Number of batteries contained | 1 | |
| Battery type | Button cell | |
| Type of product | Probes | |
| Power supply | Battery-powered |
Identification numbers & Classifications
| Article number | 359450 4 | |
| EAN / GTIN | 4062406370602 | |
| Manufacturer number | 359450 4 |
Description
Version:
- Possibility to transfer the measured values in combination with GARANT Xconnect No. 359455 1.
- Suitable only for Siemens and Heidenhain controllers. The machine requires a functioning USB port on the control panel.
- High accuracy and linearity. For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment.
- Convenient and simple concentricity adjustment.
- Large working range in all directions (x, y, z = 7 mm).
- Compact metal body.
- Dust-tight and watertight = IP67.
- Predetermined breaking point.
- Simple menu navigation.
- Quick commissioning without hardware changeover and service engineer use.
- No need to interfere with the machine tool operating system!
- Minimisation of rejects.
Function:
IP67: Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
Automatic transmission of the measured values into the machine control by GARANT Xconnect No. 359455 1.
For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment. Manual operation without wireless transmission (without XCONNECT) is also possible.
For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment. Manual operation without wireless transmission (without XCONNECT) is also possible.
Supplied with:
Supplied with battery CR2 and contact point No. 359505 size 4.
Optional extras:
XCONNECT data memory stick No. 359455 1.
Note:
Suitable contact point No. 359505 4. The item is permanently installed on a machine and can only be used on another machine through another cycle request.