{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre with extended point 60°/30° 1
Article no.: 320670 1
Article code:
Click to enlarge image
With extended point 60°/30°.
Click to enlarge image
Extended point for unobstructed access to the turning tool.
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Morse taper | MK1 | |
| Body ⌀ D | 34.5 mm | |
| Reach B | 70.5 mm | |
| largest centre point ⌀ 60° A | 15 mm | |
| largest centre point ⌀ 30° A | 9 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 27 mm | |
| for workpiece weight | 80 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320670 1 | |
| EAN / GTIN | 4019208017044 | |
| Manufacturer number | 058668 |
Description
Version:
- Body and live centre hardened.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- With extended centre, point angle 60° / 30°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.
Extended point allows unobstructed access for the turning tool on the end face of the component. Particularly suitable for copy turning.
Extended point allows unobstructed access for the turning tool on the end face of the component. Particularly suitable for copy turning.